2 self-adhesive waterproof membrane on 2.0mm

Membrane is a high density Polyten compounds and compound bitumen / rubber stamping. Absolutely effective for walls, floors of commercial TT, Seno, roofs, domes and sloping roofs.

Especially effective for waterproofing basements.
Can use the membrane for both wet and dry surfaces.

FEATURES
- Easy to transport and use.
- People, do not use heat to prevent fire hazards.
- Able to withstand the vehicle due to its high elastic

The process of construction against wetting

Step 1. Clean the surface before application. Create surface moisture.		Step 2. Personnel plaster around 3 ~ 5 mm thick within the construction.		Step 3. Peel the paper layer, membrane onto the surface of the mortar that was flat and smooth

Step 5.membrane pressed tightly so no air beneath waterproof layers.		Step 4. Paste the membrane to overlap each other at least 60 mm. Note not just stepping on the surface of the construction is finished, after 48 hours adhesive membrane with plaster.

2. Process Execution "Dry Waterproofing"

The whole process of proof is similar to dry against wet but notice a difference, which is the second step, the mortar will be replaced by the primer.

The structure of the "wet waterproofing membrane"

A great progress in the field of waterproofing in the world today

And effectively achieve

Membrane wall	Pour the concrete to the surface membrane	And provide effective adhesion

STORAGE

1. Waterproofing membrane must be stored in a dry, ventilated area, away from sunlight and rain.
2. Classification of membrane, arranged horizontally, not exceeding four roll stack
3. Keep away from flammable substances