Lemax 201 is a flexible cement based of 2 components polymer modified waterproof coating. It is suitable applied to concrete and mortar to prevent water infiltration as to fill and seal pores and voids, crack and hair line of all substrates and yet provides a breathable coating which allows water vapour transmission. And as a protective layer against aggressive gas such as carbon dioxide and also frost and thawling salts.

USES
Lemax 201 consists of Portland cement, selected and well graded sand and plasticiser, formulated with specially selected and graded fine quartz and high quality latex to create a brushable, smooth slurry with excellent bond and adhesion to most substrates.
It is a flexible cementitious waterproofer suitable use in:
- Bathrooms, toilet and kitchens
- Balconies and planter boxes
- Swimming pools
- Water tanks
- Basement wall
- Retaining walls
- Sea walls
- Reservoirs
- Concrete gutters.

TECHNICAL DATA

SURFACE PREPARATION
- Substrates to be applied with Lemax 201 must be clean and free from laitance, protrusions, loose particle, dirt, oil and grease.
- Sharp edges must be flattened and uneven surfaces must be leveled or repaired with a mortar screed by using Lemax 600.
- Clean and proper repaired surface must be thoroughly saturated with water prior to application of Lemax Primer.
- Be caution: No standing water or excessive water shall be remained on the substrate that to be applied with Lemax 201.

MIXING
Lemax 201 is supplied in 2 components, to generate a consistent slurry, pour the liquid component into a pail following by adding in the powder component gradually to the liquid. In the meantime, use a stirrer to stir the mixture until the mixture is free from lumps. Take note of the consistency of the slurry. The consistency of the slurry can be altered by reducing or adding in powder component.

APPLICATION
- Apply Lemax 201 with a stiff brush or spray onto the prepared surface with at least two coats. Interval of each coat should be 1-2 hours minimum. To avoid pin holes and ensure full coverage, apply each brush coat at different direction.
- For large space, spray is recommended by using a worm-gear type of spray equipment.
- For best result, apply Lemax 201 under shaded shelter to prevent rapid drying of the coating.

HEALTH AND SAFETY

Lemax 201 contains cements which may cause skin irritation. For personal precaution, protective gloves and goggles are recommended to be worn during handling of this product. If product contacts with eyes, flush immediately with clean water and seek medical assistance is symptoms prolong.