DESCRIPTION

Membranes in combination with rubber modified asphalt and moisture-resistant polypropylene reinforced with heat-resistant mesh and penetrated. Specifically designed to waterproof under hot asphalt concrete overlay.

FEATURES

Cold applied - no heat or glue factory with the hot Bitumen, the eyelids overlap self adhesive provides continuity.

Flexible - easy construction, adaptation to changes in tilt, can cover the cracks to 0.6mm.

Bearing good - machines can withstand the road.

The pre - thickness is guaranteed, regardless of the changes on the site.

Reinforcement mesh - offers the stability of the shape, size and mechanical durability capabilities.

Rubber / Bitumen - elastic adhesive mixtures are possible good adhesion and transfer of vehicle brakes down the road, can heal small cuts.

APPLICATIONS

Bituthene 5000, also known as high-volume Bituthene, the waterproofing material combined net strength and heat resistance are involved in a mixed layer of rubber adhesive Bitument. The product is supplied in rolls with a layer of special paper to protect adhesive surface until use and easy to handle during installation.

Bituthene 5000 is provided in rolls 1m wide, 20m long and a minimum thickness of the membrane is 1.6 mm and 2 mm. Rubber asphalt layer was covered with a protective paper is peeled off during the construction. Membrane construction adhesive and cold. No additional adhesive or any other special equipment to create an overlay (lap).

Bituthene 5000 is product superiority Vietnamese membrane used for commercial centers, bridges, construction traffic or parking on asphalt concrete overlay surface. Products can be used for the construction of new projects or repairs.

5000 Bituthene strips should be used for the rehabilitation of concrete pavement with an overlay of asphalt concrete mix to prevent early failure of asphalt on the horizontal and vertical joints caused by cracks and food worn surface.

5000 Bituthene membrane retains flexibility in conditions of high temperature fluctuations can occur in shopping centers, bridges, and parking. Reliability and flexibility of the product allows it to cover small cracks, even in the harsh winter months.

This membrane is capable of waterproofing and anti-icing salt solution of high rocks. Against infection from the textured electric exception proves the effectiveness of Bituthene 5000 to prevent water penetration into the structure.

TECHNICAL DESCRIPTION

Images of the membranes adhesive Bituthene 5000

All areas will be constructed as a waterproofing membrane adhesive minimum thickness of 1.6 mm or 2 mm rubber mounted asphalt mixed with polypropylene mesh membrane (Bituthene 5000 produced by WRGrace & Co. ).

5000 Bituthene shape available to be pasted onto the concrete surface smooth and primed with Primer B1 and have a minimum of 50mm overlap eyelid.

Bituthene 5000 must be constructed according to the manufacturer's instructions and supplied by Grace Construction Products. For more information, contact your local Grace representative.