Product

Related

PVC Water Balance

PVC water resistance elastic tape is made from PVC plastic composite quality. Product range of PVC tape block is designed to provide comprehensive waterproofing system for the joints, concrete expansion joints. Tape PVC water resistance is effective in preventing water infiltration through the joints, construction joints.

The balance of outside water

This type designed for constructing basement, foundation and floors, can be applied vertically or horizontally to the works or water tanks.

When using products for waterproofing the wall, locate the external balance can only prevent the water pressure at the use block ice water.

When using the product beneath the floor, or vertical construction, ice water resistance is supported by concrete finishing.

APPLICATIONS:

For concrete works of water:

- Water tanks

- Fountain

- Waste water tanks

- Dam, sluices, canals

- The spillway

- Pool

- Fluid tank

Concrete drainage works:

- Basement buildings, underground parking system.

- Tunnel, subway tunnels.

- Foot bridges, retaining walls.

- Roofing roof

FEATURE

Density 1.3 ~ 1.5
ASTM D 297 – 93
Tensile 12~ 15Mpa
ASTM D 412- 98
Elongation to break point 250%.
ASTM D 412- 98
Hardness (Type A) 75 ± 10
ASTM D 2240- 2
Elasticity -30 ± 5ºC
Weight tolerance maximum ± 3
KS M 3850 2003
JIS K 6773 1999
ASTM D 638 2003
ASTM D 2240 2005
ASTM D 5147


DIRECTIONS FOR USE

Make sure the ice block is positioned in the construction process. Must be filled with concrete around the ice block, avoid creating voids and air holes.

CUT AND GRAFTING PRODUCTS

Put a block of ice water was cut overlaps the other end of the strip should be cut about 5 cm or more if necessary.

Indian head on and start a knife under the edge of the tape product repel water was cut back to two equal parts. Then press the two cut edges of the ice block with a special welding machine to heat the second side with each other simultaneously until the material melted, take the product off the welding machine and match two edges are melted together and hold until completely cold weld compound to form a weld coupling uncertainty.

NOTE: The balance of water in the middle

Type of ice water resistance is fixed in position between the concrete, can withstand water pressure from the sides. Suitable for use in construction of water retaining structures, works to prevent the leakage of water outside and water outside the ground back to remove the water tanks. Tapes repel water hole in the middle used for construction expansion joints and construction joints. Type of ice water resistance is not losses only for construction joints