Form release agent in concentrated emulsion form

USES

- Form release agent for steel and wooden formwork

- Sika Formoi® C facilitates removal and cleaning of shuttering

- It shall be diluted with water prior to use

ADVANTAGES

- Easy to apply

- Combined chemical and physical action

- Ensures fair faced concrete finish

- No staining

- Suitable also for use on formwork used in steam curing process

Surface preparation: All surfaces to be coated with Sika Formoil C must be clean and free fron grease and old concrete


Application: Dilute one litre Sika Formoil® C with ten litres of water (can be extended up to fifteen litres of water for some cases – pre-trial recommended) and stir thoroughly until the mixture turns into uniform milky solution

Apply one uniform coat of Sika Formoil® C by brush, roller or spray equip- ment, on dry or damp formwork. The dilution should be re-stirred immediately prior to use

HEALTH AND SAFETY

Wear suitable protective clothing, goggles and gloves during working with this product. The product should not get into drains, water and ground