APPLICATION

- Cut concrete or rock in “V” shape around the leaking point. Remove all chipping, unsound and loose particles and clean surface with water prior to application of Sika Plug CN

- Fill freshly prepared Sika Plug CN into the V-shape cut, starting outside and work towards the center of the leak (plug minor leak first). Hold materials in place, and then strike off flush with surface.

- If water pressure is very high, it is recommended to use wooden plug first, which is then covered and secured with Sika Plug CN

Notes on application/ limits: It is recommended to prepare Sika Plug CN in small quantities at a time. If mixed in large amount, hardening may occur before it is completely used. Do not mix Sika Plug CN with other admixtures, cement or sand.

HEALTH AND SAFETY

Sika Plug CN is hygroscopic. Seal unused quality immediately in original container. Sika Plug CN is cement base therefore is alkaline. Use rubber gloves when working with Sika Plug CN. If Sika Plug CN gets into eyes, clean out immediately with fresh water