

- Contact
- News |
- Video |
- Thư chúc tết |
- Tuyển dụng |
- Home |
Product
|
Related |
| Sikament® MP |
A highly effective superplasticizer with a set retarding effect for produc- ing flowable concrete in hot climate and also a substantial water reduc- ing agent for promoting ultimate strength. Sikament MP complies with ASTM C494 Type D & G.
Sikament MP is used as a superplasticizer and set-retarding admixture in structural and mass concrete where long lasting slump and a con- trolled extension of setting time is required, such as:
- Large volume pours
- Long hauls concrete
- Foundations
- Floor slabs
- Slender components with densely packed reinforcement
- Walls, columns, beams
Sikament MP provides the following properties:
As a superplasticizer with set retarding effect::
- Highly effective without increased w/c ratio
- Lasting control of slump loss
- Controlled setting time
- Avoidance of cold joints
- No adverse effect on ultimate strength
As a water reducer:
- Strength significantly increased
- Allow substantial cement reduction compared to plain concrete
- Especially suitable for hot climate
- No excessive air entrainment
- No adverse shrinkage effect
- Improved surface finis
Dosage: 0.60 – 1.80 ltr per 100 kg of cement
Typical Dosage: 0.80 - 1.40 ltr per 100 kg of cement
1.40 - 1.80 for special Bone Pile application
Compatibility: Possible to combine with all Sikament, Sika Aer, Sika Pump, Sikacrete PP1, but must be added separately to the mix and not pre-mixed prior addition.
Cement types: All Portland cement including sulfate resistant cement.
Dispensing: Sikament MPcan be added directly to the gauging water prior to its addition to the dry mixed aggregates or simultaneously with the gauging water at the batching plant.When added directly to the freshly mixed concrete, the plasticizing effect is more pronounced. For addition at job site, Sikament MP is added to the concrete immediately prior to discharge and after further mixing has taken place for three minutes.
Overdosing: Significant overdosage will result in increased workability and setting time of the concrete. However, provided concrete is cured effectively, ultimate strength and properties will not be affected.
Note: Due to extended setting time, proper curing must be ensured. Do not vibrate green concrete or temper embedded rebars whilst setting
HEALTH AND SAFETY
Avoid contact with foodstuffs and utensils. Avoid prolonged skin contact. In the event of contamination wash thoroughly with water. If the eyes or mouth are affected wash with clean water and obtain medical attention immediately
Vietthai trading co.,ltd Head Office: Lot. K81C Thu Trung - Dang Lam – Hai An Dist – Hai Phong City, VietnamTel: 0313.558.619 / Fax: 0313.558.690 Email: chivietthai@chongtham.vn Website: www.Chongtham.vn :: www.vietthaico.com |
Branch in Hanoi P202 - C6 Building Blocks 2 - My Dinh 1 Urban - Tran Huu Duc St - Tu Liem Dist – Ha Noi City, VietnamTel: +84-4-6287 4144 / Fax: +84-4-6287 4147 Email: vietthai@chongtham.vn Website: www.Chongtham.vn :: www.vietthaico.com |
