People in the housing, the waterproof toilet is not good sometimes annoying to many things after putting to use.

Recommended Products:

- Waterproofing membrane such as ammunition waterproofing Membrane Petro (Italia), waterproofing Membrane KM (Taiwan), ... the membrane is made of a thermoplastic composition to improve bitumen, reinforced with fiber reinforced polyester systems are highly resilient and withstand the extreme temperature conditions.

- Mixture of two components as Contite FCW (UK) as the original plastic cement and polymer membranes have high elasticity, protect concrete from cabonat and pollutants, create a hard surface and abrasion.

* Prepared By *

- Survey and determine the cause of leak proof

- Removing all equipment and water supply systems in the area to be treated waterproof.

- Hand remove all layers of tiles and wall tiles under the WC room, sauna ...

a, Using membrane form of ammunition:

- Industrial machine cleaning the entire surface to be waterproof.

- Surface should be hard, clean, dry and not sticky weak mortar, grease or other impurities.

- Hot, dry surface and tube construction Dried melting membrane adheres to the surface of concrete floors and wall surrounds.

- Amplitude of overlap between each adjacent to a 50mm.

b, Using a mixture of two component waterproofing cement base:

- Industrial machine cleaning the entire surface to be waterproof.

- Surface should be hard, clean, dry and not sticky weak mortar, grease or other impurities.

- All surfaces after cleaning the spray water will be a humidifier then use the tools such as brooms to copy or scan thick brush.

- Construction of two classes, first class to class Monday from 2 to 4 hours.

- Construction of the second layer in the direction perpendicular to the first layer.

After treatment with waterproof materials such as conducted on the brick paving, installing drainage systems and other equipment as the initial state.