A / Step I: Concrete Processing

Waterproof Surface preparation: Concrete Coating remove impurities and excess grip on the floor, concrete walls, steel toilet brush, can make the necessary ground for floors and walls clean, flat. The place concrete walls are porous, while pouring concrete and the rock stratum adjacent joints and pour concrete before then (if any). Reprocessed by chisel out the concrete floor was a clear, clean, scan, or connect Sika Sika Monotop Latex TH 610, filling it with plaster mortar Sika Sika Dur 731 pour grout or mortar does not shrink high strength, make sure to compact the concrete, as the case specific location. Patching the floor and walls to ensure strength, leaving no defects tat.Tat the iron tree, iron wall hole punched company into concrete used to remove welding machine, filling plaster Sika Latex TH, Sika MonoTop R or 731-bit Sikadur lai.Bo back wall next to the corner, legs up high column 15 - 20cm with waterproof mortar additives needed thiet.Ve Sika Latex TH regenerate the whole area of ​​construction dust again no impurities . Saturation of the entire construction area of ​​moisture but not to standing water on the floors. The distance of time scanning each layer waterproof least 90 minutes, depending on the weather.

B / Step II: Choose the product for waterproofing

1 / 107 Sikatop Seal

Scan 2 layers or 3 layers Sika Top Seal 107 two-component elastomeric waterproofing penetration. Waterproof cement mortar base polymer improved two components, the product is constructed on the surface of mortar and concrete to prevent water infiltration. Product applications Sika top seal 107 items pool, pool, basement, walls, balconies, will try, toilet, terrace, roof floor. Sika Top 107 seal the two components have been quantified available, easy to mix, is like a lake of oil viscosity, ease of application. Sikatop seal 107 has very good adhesion to the surface of compact, waterproof, layer is effective resistance against carbonation process. 107 Sikatop seal non-toxic, non-abrasive, finishing concrete gray offering tong.Tron Sikatop seal 107 in the normal case, when the entire second mixing ingredients together in a clean bucket, pour into Part A before stir and pour slowly into the liquid component B into and still need to stir with a low-speed electric mixer (about 500 rounds / minute) will form a viscous oil tank. For the background: Once you have saturated the entire construction area of ​​moisture but not to standing water on the surface nen.Doi smooth vertical wall and smooth the surface must be saturated with a certain interval to limited moisture makes a good waterproof hon.Thi scan the first coat to dry frozen products after about 6 hours (depending on weather) before scanning the second layer. The third layer is similar to seal 107 generally tren.Sikatop no maintenance, but also carry out preventive measures if the location of construction influenced directly under the sun or windy places.

2 / Trowel mix Sika Latex / Sika Latex TH

Sika is a latex emulsion improved Styrene butadiene mixed with cement grout or sand to increase the adhesion and resistance to penetration, is senior additives and waterproofing agent noi.Lop latex and oil tank . mong.Lop patching plaster stucco wall against the officers tham.Lop mortar waterproofing, concrete repair Resistant mon.Vua tong.Vua gach.Vua paste construction. Sika excellent latex adhesive, excellent resistant, reduce shrinkage, increase elasticity, chemical resistance, non-toxic, waterproof suitable for drinking water tanks.

Mix materials to primed connected:

Use 1 liter of Sika Latex TH + 1 liter water + 4 = Kg cement latex and oil tank scan connections.

Scan Latex oil tank connected to the entire area TH waterproof construction (note primed latex oil tank connected to what must be waterproof latex paint mixing right there).

Mix the plaster material for waterproofing warrants:

Rate of 1 + 3 sand cement mix

Rate of 1 liter of Sika latex TH + 3 liters of water and mix.

Use a latex component of Sika TH components mixed into the sand ready-mix cement, mix until achieving satisfactory plastic consistency. Conducting layer of waterproof mortar when mixed oil tank connection class students also uot.Ve wall surface, the concrete inside, clean out the tank before hand giao.Neu hot weather, windy maintenance must be conducted to prevent mortar from drying too soon. In the case of waterproofing for underground structures such as the pool is always wet .... Should be waterproof plaster to dry latex a week before discharge into the use of works permanently

3 / SCAN 3 + ORDER A CLASS SIKAPROOF Membrane Waterproofing mortar Sika Latex BY TH.

Sikaproof Membane is liquid waterproofing membrane to improve water-based polymer bitumen, a part, construction cooled, use the categories of works such as:

+ Outside the basement wall.

+ Balcony, will try, terrace, roof floor.

+ Ease of application, drying, solvent, the product is black.

MATERIALS INCLUDE:

Cement.

Cat ready to clean.

Chemical additives are:

+ Sikaproof Membane

Sika Latex + TH

APPLICATION PROCESS

+ Execution Sikaproof Membane first layer (lining) mixed with 50% water, using brush, roller block, concrete sprayed onto the dry surface, the rate of about 0.3 kg/m2.

+ The first layer dry (after about 2 hours) to continue construction of the second tier of about 0.85 kg/m2

+ The second layer dried (after about 3 hours) to continue construction of the first layer 3 of about 0.85 kg/m2

+ Sika waterproofing layer connectivity TH latex will be constructed on top of the first 3 Sikaproof Membane, after construction is 4 hours.

Mix 1 liter of Sika Latex + TH + 1 liter water + cement = 4 Kg TH latex and oil tank scan connections.

+ In connection with wet liners, conducting layer of waterproof mortar Sika Latex TH (the norm for a liter of Sika Latex TH 1m2 20mm thickness).

With one liter of Sika Latex norms TH + 3 liters of water by mixing 1 volume of cement 3 sand.